Programmable Temperature Converter STD

Programmable temperature converter STD is used for conversion of the output signal from the temperature sensor to the unified or agreed output electric signal. It is possible to calibrate or reset input sensor and the range of the convertors with PC software. Various types of resistance and voltage sensors may be used as the temperature sensors, and after consulting with the producer, even with a different output. The unified analogue output or a serial line enables their integration into upper control systems. The STD converter is to be assembled to a DIN board.

Equipment and accessories:

- Various possibilities of temperature sensors

- Possibility of resetting the range and calibration of the converter

- Various possibilities of analogue output

- Communication with a control system with a communication line RS-232, RS-485

Files for download

Ordering Table

Technical Description

Technical Conditions, Installation, and Connection

Overvoltage Surge Barrier PBM

Overvoltage surge barriers type PBM are intended for protection of the inputs and outputs against undesirable effects of electric voltage. The overvoltage surge barriers are put between feeder conductors and protected electronic devices. They are to ground the voltage impulse emerged from overvoltage. The inevitable condition of the correct function of the device is good grounding of the ground clamp of the overvoltage surge barrier. The overvoltage surge barrier is produced as a variant into an installation box [protection of the devices connected outside a distributor] or for an installation to a DIN board [as output clamps in a distributor].Equipment and accessories:- Variant into an installation box RV-3 for assembly outside a distributor- Variant for installation to a DIN board for as ... more

Stabilizované zdroje 16 ADR max. 16 W

... more