Contact Manometer PM 111


Contact Manometer PM 111

Contact manometers type PM 111 with a sensor with metal diaphragm are intended for measurement, control, and displaying of instantaneous value and chosen physical unit of the pressure of the measured medium. Manometers may be equipped with 4 resettable contacts. Their high overload capacity, accuracy, and reliability allow their universal usage in industry, even in adverse conditions.

Equipment and accessories:

- Up to 4 resettable contacts

- Displaying of the pressure at an 8-digit alphanumeric display

- Possibility of setting the physical unit

- Possibility of setting all the parameters with the buttons at the front display board

- Possibility of resetting the range and calibration of the manometer

- Accuracy up to 0.08 %

- Various possibilities of analogue output

- Communication with a control system with a communication line RS-232, RS-485, Bluetooth, or XBee

- Optional backlighting and display color

Certificates:

- Certificated TSK 173/06 - 010 as a gauge under legal metrological control.

Files for download

Certificate of the Type

Instructions for Use - SW Version 1.82

Instructions for Use - SW Version 1.52

Ordering Table

Technical Description

Technical Description, Installation, and Connection

Related products
Pressure surge dampers TTR are intended for protection of the pressure transmitters and manometers against pressure surges emerging in pressure distribution. ... more
Overvoltage surge barriers type PBM are intended for protection of the inputs and outputs against undesirable effects of electric voltage. The overvoltage surge barriers are put between feeder conductors and protected electronic devices. They are to ground the voltage impulse emerged from overvoltage. The inevitable condition of the correct function of the device is good grounding of the ground clamp of the overvoltage surge barrier. The overvoltage surge barrier is produced as a variant into an installation box [protection of the devices connected outside a distributor] or for an installation to a DIN board [as output clamps in a distributor].Equipment and accessories:- Variant into an installation box RV-3 for assembly outside a distributor- Variant for installation to a DIN board for as ... more