Contact Manometer PM 102 K


Contact Manometer PM 102 K

Manometers type PM 102 K with a sensor with ceramic diaphragm are intended for displaying of instantaneous value of the pressure of the measured medium at LED display. This type of display enables good legibility even in poor light or at greater distances. Manometers may be equipped with 4 resettable contacts. Ceramic diaphragm of the sensor enables using the manometers for measurement of chemically aggressive media, pure gasses [such as oxygen or helium, etc.].

Equipment and accessories:

- Up to 4 resettable contacts

- Displaying of the pressure at LED display

- Possibility of setting all the parameters with the buttons at the front display board

- Possibility of resetting the range and calibration of the manometer

- Accuracy up to 0.25 %

- Various possibilities of analogue output

- Communication with a control system with a communication line RS-232, RS-485, Bluetooth, or XBee

Certificates:

- Certificated TSK 173/06 - 010 as a gauge under legal metrological control.

Files for download

Certificate of the Type

Instructions for Use - SW Version 1.5

Ordering Table

Technical Description

Technical Conditions, Installation, and Connection

Related products
Overvoltage surge barriers type PBM are intended for protection of the inputs and outputs against undesirable effects of electric voltage. The overvoltage surge barriers are put between feeder conductors and protected electronic devices. They are to ground the voltage impulse emerged from overvoltage. The inevitable condition of the correct function of the device is good grounding of the ground clamp of the overvoltage surge barrier. The overvoltage surge barrier is produced as a variant into an installation box [protection of the devices connected outside a distributor] or for an installation to a DIN board [as output clamps in a distributor].Equipment and accessories:- Variant into an installation box RV-3 for assembly outside a distributor- Variant for installation to a DIN board for as ... more
Pressure surge dampers TTR are intended for protection of the pressure transmitters and manometers against pressure surges emerging in pressure distribution. ... more